| 基于嵌入式实时操作系统的开放式数控系统的研究 |
| |
| 引用本文： | 朱利东,殷苏民. 基于嵌入式实时操作系统的开放式数控系统的研究[J]. 机床与液压, 2004, 0(1): 92-94 |
| |
| 作者姓名： | 朱利东 殷苏民 |
| |
| 作者单位： | 江苏大学机械工程学院,江苏,镇江,212013;江苏大学机械工程学院,江苏,镇江,212013 |
| |
| 摘 要： | 阐述了开放式数控系统的特点和要求，在比较通用操作系统和实时操作系统后，提出了基于Windows CE．NET平台开放式数控的构想，并初步介绍了在此平台上全软件数控系统的结构。
|
| 关 键 词： | 开放式数控 嵌入式实时操作系统 Windows CE.NET |
| 文章编号： | 1001-3881(2004)1-092-3 |
| 修稿时间： | 2003-01-27 |
An Open-architecture CNC System Based on RTOS |
| |
| ZHU Li-dong,YIN Su-ming. An Open-architecture CNC System Based on RTOS[J]. Machine Tool & Hydraulics, 2004, 0(1): 92-94 |
| |
| Authors: | ZHU Li-dong YIN Su-ming |
| |
| Abstract: | The characteristics and demands of open-architecture CNC system is introduced briefly. After analyzing real-time operating system and other operating systems,the idea that use Windows CE NET as software platform is proposed, and a software open-architecture CNC system is presented elementarily. |
| |
| Keywords: | Open-architecture CNC system Real-time embedded operating system Real time Windows CE.NET |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
