| 薄板激光冲击强化残余应力场的数值模拟与试验 |
| |
| 引用本文： | 王文兵,陈东林,汪诚,张东方,李应红. 薄板激光冲击强化残余应力场的数值模拟与试验[J]. 塑性工程学报, 2010, 17(2). DOI: 10.3969/j.issn.1007-2012.2010.02.006 |
| |
| 作者姓名： | 王文兵 陈东林 汪诚 张东方 李应红 |
| |
| 作者单位： | 空军工程大学,工程学院,西安,710038 |
| |
| 摘 要： | 激光冲击强化会在材料表面形成深度达到1 mm的残余压应力,而对于厚度小于1 mm的薄板,由于冲击时应力波的反射和叠加,其残余应力场的分布肯定不同于厚板。文章采用4种冲击方式(单面冲击、底面约束情况下的单面冲击、双面非同时冲击以及双面同时对冲)对2024铝合金薄板(厚度为1 mm)进行激光冲击强化,并应用有限元软件ANSYS/LS-DYNA对其进行数值模拟,系统分析经过4种不同的冲击方式,得到薄板的变形以及残余应力的分布情况。结果表明,双面同时对冲方式能够使薄板两面都产生很大的残余压应力,而且不会出现弯曲变形,是理想的冲击方式。
|
| 关 键 词： | 激光冲击强化 有限元 残余应力 ANSYS/LS-DYNA 薄壁板材 |
Numerical simulation and experimental investigation of residual stress field for laser shock processing |
| |
| WANG Wen-bing,CHEN Dong-lin,WANG Cheng,ZHANG Dong-fang,LI Ying-hong. Numerical simulation and experimental investigation of residual stress field for laser shock processing[J]. Journal of Plasticity Engineering, 2010, 17(2). DOI: 10.3969/j.issn.1007-2012.2010.02.006 |
| |
| Authors: | WANG Wen-bing CHEN Dong-lin WANG Cheng ZHANG Dong-fang LI Ying-hong |
| |
| Affiliation: | WANG Wen-bing CHEN Dong-lin WANG Cheng ZHZNG Dong-fang LI Ying-hong(Air Force Engineering University,Xi'an 710038 China) |
| |
| Abstract: | During laser shock processing the residual compressive stress may reach 1mm under the surface.But for the sheet thinner than 1mm,due to the reflection and superposition of shock stress wave,the distribution of residual stress field would be different from that of thick sheet.Four methods are introduced to impact 2024 aluminum alloy sheet 1mm thick including single-sided impact not restrained;single-sided impact with the bottom restrained;non-simultaneous double-sided impact and simultaneous double-sided imp... |
| |
| Keywords: | ANSYS/LS-DYNA |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
