Effect of the salt addition practice on the grain refining efficiency of Al–Ti–B master alloys

The impact of the salt addition practice on the microstructure and grain refining efficiency of Al–Ti–B alloys produced by the “halide salt” route was investigated. The grain refining performance of an experimental Al–5Ti–1B master alloy was optimized when the halide salts were pre-mixed before addition to aluminium melt at 800 °C during the production of the grain refiner. The stirring action provided during salt addition was found to degrade, while a high rate of addition was found to improve, the grain refining efficiency. In view of the above, an improved salt addition practice to ensure an exceptional grain refining performance is claimed to comprise the following steps: melting commercial purity aluminium ingot; addition of pre-mixed salts to molten aluminium at 800 °C, at once to facilitate a rapid salt reaction, gently mixing the salts with the aluminium melt without introducing any stirring. The grain refiner master alloy thus produced gives an average grain size of 102 μm 2 min after inoculation.