One step electrodeposition of V2O5/polypyrrole/graphene oxide ternary nanocomposite for preparation of a high performance supercapacitor

A new ternary nanocomposite based on graphene oxide (GO), polypyrrole (PPy) and vanadium pentoxide (V₂O₅) is obtained via one-step electrochemical deposition process. Electrochemical deposition of V₂O₅, PPy and GO on a stainless steel (SS) substrate is conducted from an aqueous solution containing vanadyl acetate, pyrrole and GO to get V₂O₅/PPy/GO nanocomposite. Characterization of the electrode material is carried out by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM). The electrochemical performance of the as-prepared nanocomposite is evaluated by different electrochemical methods including cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS) in 0.5 M Na₂SO₄ solution. Remarkably, V₂O₅/PPy/GO nanocomposite shows a specific capacitance of 750 F g^?1 at a current density of 5 A g^?1, which is far better than PPy (59.5 F g^?1), V₂O₅/PPy (81.5 F g^?1) and PPy/GO (344.5 F g^?1). Furthermore, V₂O₅/PPy/GO maintains 83% of its initial value after 3000 cycles, which demonstrates good electrochemical stability of the electrode during repeated cycling. These results demonstrate that the combination of electrical double layer capacitance of GO and pseudocapacitive behavior of the PPy and V₂O₅ can effectively increase the specific capacitance and cycling stability of the prepared electrode. Also, a symmetric supercapacitor device assembled by V₂O₅/PPy/GO nanocomposite yielded a maximum energy density of 27.6 W h kg^?1 at a power density of 3600 W kg^?1, and a maximum power density of 13680 W kg^?1 at an energy density of 22.8 W h kg^?1.