| 往复式隔膜泵曲柄滑块机构虚拟样机研究 |
| |
| 引用本文： | 郝亮,黄艳萍,郝刚,管长焦. 往复式隔膜泵曲柄滑块机构虚拟样机研究[J]. 煤矿机械, 2011, 32(12): 68-69 |
| |
| 作者姓名： | 郝亮 黄艳萍 郝刚 管长焦 |
| |
| 作者单位： | 1. 三一重型装备有限公司研究本院,沈阳,110027
2. 煤炭科学研究总院沈阳研究院,辽宁抚顺,113122 |
| |
| 摘 要： | 采用三维建模技术建立隔膜泵曲柄滑块机构数字化模型,结合虚拟样机技术对隔膜泵曲柄滑块机构进行仿真,对连杆和十字头部分的负荷进行计算机模拟,从而为隔膜泵十字头的设计打下基础。
|
| 关 键 词： | 隔膜泵 十字头 虚拟样机 |
Research on Virtual Prototyping of Slider-crank Mechanism in Diaphragm Pump |
| |
| HAO Liang,HUANG Yan-ping,HAO Gang,GUAN Chang-jiao. Research on Virtual Prototyping of Slider-crank Mechanism in Diaphragm Pump[J]. Coal Mine Machinery, 2011, 32(12): 68-69 |
| |
| Authors: | HAO Liang HUANG Yan-ping HAO Gang GUAN Chang-jiao |
| |
| Affiliation: | HAO Liang1,HUANG Yan-ping1,HAO Gang2,GUAN Chang-jiao2(1.Supporting Research Institute,Sany Heavy Equipment Co.,Ltd.,Shenyang 110027,China,2 Shenyang Branch of China Coal Research Institute,Fushun 113122,China) |
| |
| Abstract: | Virtual prototyping and three-dimensional modeling technology were applied to design slider-crank mechanism in diaphragm pump.The virtual prototyping was established by Pro/Engineer and ADAMS view.Force situation of crosshead and connecting rod were analyzed trough computer simulation,the simulation results will provide basic to further designing. |
| |
| Keywords: | diaphragm pump crosshead virtual prototyping |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
