| 基于AutoCAD的FLAC3D地下工程快速建模方法研究 |
| |
| 引用本文： | 伍永平,高永刚,解盘石.基于AutoCAD的FLAC3D地下工程快速建模方法研究[J].煤炭工程,2011,0(12):61-64. |
| |
| 作者姓名： | 伍永平 高永刚 解盘石 |
| |
| 作者单位： | 西安科技大学能源学院,陕西西安710054;西部矿井开采及灾害防治教育部重点实验室,陕西西安710054 |
| |
| 基金项目： | 国家自然科学基金(51074120); 陕西省教育厅重点实验室项目(08JZ01,08JZ02); 教育部科学技术研究重点项目(地方03166) |
| |
| 摘 要： | FLAC3D网格建模主要采用命令驱动模式。在模型工程地质条件较复杂的情况下,其建立三维网格模型的效率明显降低。针对采矿工程领域的数值模拟计算问题，研究了AutoCAD平面图形向FLAC3D模型转换的方法。利用AutoCAD建立了FLAC3D模型，并给出了详细的方法与步骤，实现了利用FLAC3D分析问题时方便、快捷地建立复杂地质模型。
|
| 关 键 词： | FLAC3D和CAD 地下工程 快速建模 |
Study on Rapid Modeling Method of FLAC3D Underground Project Base on AutoCAD |
| |
| WU Yong-ping,GAO Yong-gang,XIE Pan-shi.Study on Rapid Modeling Method of FLAC3D Underground Project Base on AutoCAD[J].Coal Engineering,2011,0(12):61-64. |
| |
| Authors: | WU Yong-ping GAO Yong-gang XIE Pan-shi |
| |
| Affiliation: | WU Yong-ping1,2,GAO Yong-gang1,XIE Pan-shi1,2 |
| |
| Abstract: | The modeling of the FLAC3D grid was mainly with the command-driven mode.When the engineering geological conditions of the model were complicated,the efficiency to establish the 3D grid model would be low obviously.According to the calculation problems of the numerical simulation in the mining engineering area,a method to convert an AutoCAD plane graph to FLAC3D model was studied.The AutoCAD was applied to establish the FLAC3D model and to provide the detail method and procedure.Thus when the FLAC3D was appl... |
| |
| Keywords: | FLAC3D CAD underground project rapid modeling |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《煤炭工程》浏览原始摘要信息 |
|
点击此处可从《煤炭工程》下载全文 |
