Ion‐imprinted PHEMA based monolith for the removal of Fe3+ ions from aqueous solutions |
| |
Authors: | Serpil Özkara Müge Andaç Veyis Karakoç Rıdvan Say Adil Denizli |
| |
Affiliation: | 1. Department of Chemistry, Biochemistry Division, Hacettepe University, Ankara, Turkey;2. Department of Chemistry, Anadolu University, Eskisehir, Turkey |
| |
Abstract: | Molecular recognition based Fe3+ imprinted monolith was prepared for selective removal of Fe3+ ions from aqueous solutions. The precomplexation was achieved by the coordination of Fe3+ ions with N‐methacryloyl‐(L )‐cysteine methyl ester (MAC) to form the complex monomer (MAC‐Fe3+). The polymerization step was then carried out in the presence of MAC‐Fe3+ complex and hydroxyethyl methacrylate (HEMA) monomer by bulk polymerization to constitude a Fe3+‐imprinted polymer (PHEMAC‐Fe3+). The specific surface area of PHEMAC‐Fe3+ monolith was found to be 35.2 m2/g, with a swelling ratio of 60.2% after the template was removed from the monolith by 0.1M EDTA solution. The maximum adsorption capacity of PHEMAC‐Fe3+ monolith for Fe3+ ion was 0.76 mg/g. The adsorption behavior of the monolith has been successfully described by the Langmuir isotherm. It was determined that the relative selectivity of PHEMAC‐Fe3+ monolith was 59.7 and 37.0 times greater than that of the nonimprinted PHEMAC monolith as compared with the Cd2+ and Ni2+ ions, respectively. The PHEMAC‐Fe3+ monolith was recovered and reused many times without any significant decrease in its adsorption capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 |
| |
Keywords: | molecular imprinting monolith molecular recognition iron removal |
|
|