| G1膜片精密级进模设计与技术创新 |
| |
| 引用本文： | 姚冬,张人科. G1膜片精密级进模设计与技术创新[J]. 模具工业, 2005, 0(12): 17-21 |
| |
| 作者姓名： | 姚冬 张人科 |
| |
| 作者单位： | 大连大显股份有限公司,辽宁,大连,116035 |
| |
| 摘 要： | 分析了G1膜片级进模的设计难点,总结了以往同类模具的设计经验,对中华映管G1膜片级进模进行了设计和技术改造创新,并对相应的技术难点加以解决,优化了模具结构及性能,取得了更佳的生产效果。
|
| 关 键 词： | G1膜片 设计重点 难点分析 |
| 文章编号： | 1001-2168(2005)12-0017-05 |
| 收稿时间： | 2005-07-13 |
| 修稿时间： | 2005-07-13 |
Design and Innovation of Precision Progressive Die for G1 Diaphragm |
| |
| YAO Dong,ZHANG Ren-ke. Design and Innovation of Precision Progressive Die for G1 Diaphragm[J]. Die & Mould Industry, 2005, 0(12): 17-21 |
| |
| Authors: | YAO Dong ZHANG Ren-ke |
| |
| Affiliation: | Dalian Daxian Co., Ltd, Dalian, Liaoning 116035, China |
| |
| Abstract: | Design and innovation was carried out on the progressive die for15 ′ G1diaphragm on the basis of previous design experience.The difficulties and technique in the design of the progressive die for G1diaphragm were analyzed and the solution was given.Better performance and effect was achieved through the innovation on the design of the die structure. |
| |
| Keywords: | G1diaphragm key points in design difficulty analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
