| 铝合金消失模真空低压铸造的充型特征 |
| |
| 引用本文： | 胡敏,樊自田,张大付,董选普,黄乃瑜. 铝合金消失模真空低压铸造的充型特征[J]. 特种铸造及有色合金, 2003, 0(2): 56-58 |
| |
| 作者姓名： | 胡敏 樊自田 张大付 董选普 黄乃瑜 |
| |
| 作者单位： | 华中科技大学 |
| |
| 摘 要： | 试验研究了反重力浇注条件下，铝合金消失模真空低压铸造的充型流动特性。通过采用电极触点法测定不同条件（真空度、浇注温度、内浇道面积）下铝合金液体流动前沿的变化规律，获得了不同条件下液态ZL101的充型等时曲线；分析了影响铝合金消失模真空低压铸造充型形态的主要因素。
|
| 关 键 词： | 铝合金 消失模铸造 真空低压铸造 充型特征 |
| 文章编号： | 1001-2449(2003)02-0056-03 |
| 修稿时间： | 2002-11-20 |
Mold Filling Characteristics of Al Alloy in Vacuum Lost Foam Low Pressure Casting |
| |
| Hu Min Fan Zitian Zhang Dafu Dong Xuanpu Huang Naiyu. Mold Filling Characteristics of Al Alloy in Vacuum Lost Foam Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2003, 0(2): 56-58 |
| |
| Authors: | Hu Min Fan Zitian Zhang Dafu Dong Xuanpu Huang Naiyu |
| |
| Abstract: | Mold filling characteristics of Al alloy in vacuum lost foam low pressure casting (VLFLPC) under counter gravity condition were examined. A variety of the regulations along with the flowing front of ZL101 Al melt and the corresponding filling is time curves in the VLFLPC at various conditions, including vacuum rate, pouring temperature, in gate area, were made with electrode touching dot method. The effects of key factors on filling behaviors of liquid Al alloy in the VLFLPC were analyzed. |
| |
| Keywords: | Al Alloy Lost Foam Casting Vacuum Low Pressure Casting Filling Characteristics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
