| 气辅注射成型工艺参数正交试验CAE模拟设定 |
| |
| 引用本文： | 欧长劲,郑子军,胡如夫.气辅注射成型工艺参数正交试验CAE模拟设定[J].塑料,2005,34(4):94-96. |
| |
| 作者姓名： | 欧长劲 郑子军 胡如夫 |
| |
| 作者单位： | 浙江工业大学机电学院,浙江,杭州,310014;宁波工程学院,浙江,宁波,315016 |
| |
| 摘 要： | 介绍了气辅注射成型中的CAE分析方法;阐述了气辅制品缺陷与工艺参数的关系;运用正交试验方法对待定气辅成型工艺参数进行合理的实验设计,采用塑料成型过程模拟仿真软件MoldflowPlasticInsight5.0对气辅成型塑料周转箱制品进行FLOW-COOL-FLOW分析,代替传统试模方法,并对CAE后处理结果进行综合分析,得到一组优化的工艺参数组合。该组气辅成型工艺参数组合可作为实际生产中的气辅成型工艺参数设定值。
|
| 关 键 词： | CAE 正交试验 气体辅助注射成型 |
| 文章编号： | 1001-9456(2005)04-0094-03 |
| 修稿时间： | 2005年3月4日 |
CAE Setting of GAIM Processing Parameter Through Orthogonal Method |
| |
| OU Chang-jin,ZHENG Zi-jun,HU Ru-fu.CAE Setting of GAIM Processing Parameter Through Orthogonal Method[J].Plastics,2005,34(4):94-96. |
| |
| Authors: | OU Chang-jin ZHENG Zi-jun HU Ru-fu |
| |
| Affiliation: | OU Chang-jin~1,ZHENG Zi-jun~1,HU Ru-fu~2 |
| |
| Abstract: | The CAE method in gas-assisted injection molding is presented.The relation between processing parameters and defects of product are elaborated.A group of optimized processing parameters through FLOW-COOL-FLOW analysis and CAE post processing results were got by using plastic molding process analysis software Moldflow Plastic Insight5.0. Before CAE analysis,orthogonal test experiment method was used for arranging processing parameters.It is proved that CAE method through orthogonal planning can be used instead of traditional repeat molding process. |
| |
| Keywords: | CAE orthogonal experiment gas-assisted injection molding(GAIM) |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
