| 弹簧卡箍多工位级进模设计 |
| |
| 引用本文： | 沈言锦.弹簧卡箍多工位级进模设计[J].锻压装备与制造技术,2007,42(6):69-71. |
| |
| 作者姓名： | 沈言锦 |
| |
| 作者单位： | 株洲职业技术学院机械工程系模具教研室,湖南,株洲,412001 |
| |
| 摘 要： | 介绍了一种利用侧刃初定位,导正钉精定位的多工位级进模具的设计.该模具的上下模固定板具有高精度和长寿命,可快速更换凹模镶块,重复装配精度高,卸料板上安装了弯曲上模,卸料板既可弹性压料又可刚性卸料.
|
| 关 键 词： | 机械制造 多工位级进模 冲压 设计 弹簧卡箍 |
| 文章编号： | 1672-0121（2007）06-0069-03 |
| 收稿时间： | 2007-09-05 |
| 修稿时间： | 2007年9月5日 |
Design of Multi-position Progressive Die for Spring Caliper |
| |
| SHEN Yanjin.Design of Multi-position Progressive Die for Spring Caliper[J].China Metalforming Equipment & Manufacturing Technology,2007,42(6):69-71. |
| |
| Authors: | SHEN Yanjin |
| |
| Abstract: | A progressive die design, which is positioned first roughly by the pitch punches, and then exactly by the pilot pin, has been set forth.The upper and lower die holder have been provided with high precision and lo.ng lives. The female die pieces can be replaced rapid with a high repeated assembling precision.The bending upper die has been installed on the stripping board which can press workpieces flexibly and strip blank rigidly. |
| |
| Keywords: | Punch Bending Multi-position progressive dies |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
