| 各类对称连杆曲线生成条件研究 |
| |
| 引用本文： | 詹葵华. 各类对称连杆曲线生成条件研究[J]. 机械设计, 2006, 23(6): 37-39 |
| |
| 作者姓名： | 詹葵华 |
| |
| 作者单位： | 苏州大学,机电工程学院,江苏,苏州,215021 |
| |
| 基金项目： | 苏州大学校科研和教改项目 |
| |
| 摘 要： | 采用几何解析法研究曲柄摇杆机构特殊对称连杆曲线的产生条件，明确轨迹综合中极具价值的自切曲线、带单尖点和双尖点曲线，以及带近似直线段曲线所对应的连杆点位置，同时得到对称连杆曲线的形态种类及其分布规律。
|
| 关 键 词： | 连杆机构 对称连杆曲线 二重点 近似直线 |
| 文章编号： | 1001-2354（2006）06-0037-03 |
| 收稿时间： | 2005-10-09 |
| 修稿时间： | 2005-10-092005-12-19 |
Research on conditions of curve formation for various kinds of symmetric connecting rod |
| |
| ZHAN Kui-hua. Research on conditions of curve formation for various kinds of symmetric connecting rod[J]. Journal of Machine Design, 2006, 23(6): 37-39 |
| |
| Authors: | ZHAN Kui-hua |
| |
| Affiliation: | School of Mechanical and Electronics Engineering, Suzhou University, Suzhou 215021, China |
| |
| Abstract: | The geometric analysis method has been adopted for studying the engendering condition of the curve of special symmetric connecting rod in crank rocker mechanism. The positions of connecting rod point that corresponding to the self-tangential curve, the curves with single tipped point and double tipped points and curve with approximate straight-line segments, which possess utmost values in track synthesis, had been made clear. The category of pattern of symmetric connecting rod curves and its regularity of distribution were obtained at the same time. |
| |
| Keywords: | connecting rod mechanisrn curve of symmetric connecting rod dual point approximate straight-line |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
