首页 | 本学科首页   官方微博 | 高级检索  
     

瞬态微弱信号输出稳定性分析
引用本文:渠红光,王晶,韩光,王玲.瞬态微弱信号输出稳定性分析[J].核电子学与探测技术,2016(12):1215-1218.
作者姓名:渠红光  王晶  韩光  王玲
作者单位:西北核技术研究所强脉冲辐射环境模拟与效应国家重点实验室,西安,710024
基金项目:国家自然科学基金青年科学基金(11305129),科技部国家重大仪器专项(413021201)
摘    要:本文分析了在辐射探测瞬态微弱信号获取中,系统输出不稳定的原因,并通过改变放大电路中的反馈网络结构,利用频域特性,采用最佳相位补偿的方法实现微弱信号稳定放大输出。最后利用CZT探测器在低能γ射线的辐射探测系统中验证测试,实验表明,辐射脉冲信号调理系统通过增加稳定性措施后,可有效提高CZT探测器对~(241)Am源的能量分辨率。

关 键 词:微弱信号  放大器  相位补偿  CZT

Stability Analysis of Transient Weak Signal Output
Abstract:In order to stabilize the output of fast weak pulse in radiation detection,the paper analyzed the system output instability reasons and introduced an available method based on frequency field.It achieved the signal magnified output through the best phase compensation as changing the feedback net of the weak pulse magnify circuit.At last,the method of design amplifier had applied in the svstem of CZT detector in low energy gamma ray radiation detection.Experiments show that radiation pulse signal conditioning system by adding stability measures could effectively improve the CZT energy resolving power to 241 Am source.
Keywords:weak pulse  amplifier  phase compensation  CZT
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号