| 丝扫描快速信号处理测量系统设计 |
| |
| 引用本文： | 邵中尉,韩定定,龚培荣.丝扫描快速信号处理测量系统设计[J].核电子学与探测技术,2016(12):1245-1248. |
| |
| 作者姓名： | 邵中尉 韩定定 龚培荣 |
| |
| 作者单位： | 1. 华东师范大学信息科学技术学院,上海,200241;2. 中国科学院上海应用物理研究所,上海,201204 |
| |
| 摘 要： | 为了提高同步辐射丝扫描探测器的测量分辨率与缩短数据处理时间,设计了丝扫描快速信号处理测量系统。该系统采用了电子学高速连续采样与平均降采样相结合的方法,自动确定拟合区间,调整关键点拟合权重,可有效提高信噪比,滤除光斑边缘毛刺噪声,降低拟合误差,提高测量分辨率与缩短测量用时;其光束位置测量分辨率可达48.3μm,光斑大小测量分辨率可达38.5μm,数据处理时间约150 ms。
|
| 关 键 词： | 同步辐射 丝扫描 信号处理 分辨率 |
Fast Signal Processing System Design of Wire Scanner |
| |
| Abstract: | A fast signal processing system was designed to improve the resolution and shorten measurement time of wire scanner.High speed continuous sample and resample are applied,fitting range can be determined automatically,weight of key points is enhanced.It is found that the system can increase signal to noise ratio,filter glitch,reduce fitting residual and improve measurement resolution.The beam position measurement resolution is 48.3 μm,size measurement resolution is 38.5 μm,the data processing time is about 150 ms. |
| |
| Keywords: | synchrotron radiation wire scanner signal processing resolution |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
