| 纯铜薄板矩形盒拉深中法兰曲边的变形分析 |
| |
| 引用本文： | 鄂大辛,庞愉平,水野高爾. 纯铜薄板矩形盒拉深中法兰曲边的变形分析[J]. 塑性工程学报, 2004, 11(6): 39-42 |
| |
| 作者姓名： | 鄂大辛 庞愉平 水野高爾 |
| |
| 作者单位： | 1. 北京理工大学,机械与车辆工程学院,北京,100081
2. 日本名古屋工业大学,日本 |
| |
| 摘 要： | 作为矩形盒拉深试验研究的一部分 ,分析了成形过程中光刻网格变形的测量结果 ,指出法兰曲边变形中 ,角对称线上凹模口附近的径向拉变形随矩形盒角半径rc 增大而增大 ,但周向压变形几乎与rc 无关。并且在角对称线上存在径向压变形的区域 ,有助于减低曲边材料的流入抵抗
|
| 关 键 词： | 矩形盒拉深 法兰曲边 径向拉伸变形 周向压缩变形 |
| 文章编号： | 1007-2012(2004)06-0039-04 |
| 修稿时间： | 2003-11-26 |
Analysis of flange corner deformation in the process of fine copper sheet rectangular case drawing |
| |
| E Da-xin PANG Yu-ping. Analysis of flange corner deformation in the process of fine copper sheet rectangular case drawing[J]. Journal of Plasticity Engineering, 2004, 11(6): 39-42 |
| |
| Authors: | E Da-xin PANG Yu-ping |
| |
| Abstract: | As a part of study of rectangular case drawing experiments,the measured results of photoetch grids in the process of forming are analysed.It's pointed out that radial tension deformation near die edge on the corner symmetric line rises with the increase of corner radius( r c ) of rectangular case in the deformation of flange corner side,however,the circumferential compressing deformation is independent of r c .Furthermore,there are areas subjected to radial pressing deformation on the corner symmetric line,which contribute to decrease the inflow resist of corner materials. |
| |
| Keywords: | rectangular case drawing flange corner radial tension deformation circumferential compressing deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
