| BCE催化剂制备双峰PE的研究 |
| |
| 引用本文： | 张敬梅,郭子方,陈伟,周俊领,杨红旭. BCE催化剂制备双峰PE的研究[J]. 合成树脂及塑料, 2005, 22(6): 1-3 |
| |
| 作者姓名： | 张敬梅 郭子方 陈伟 周俊领 杨红旭 |
| |
| 作者单位： | 中国石油化工股份有限公司北京化工研究院,北京,100013;中国石油化工股份有限公司北京化工研究院,北京,100013;中国石油化工股份有限公司北京化工研究院,北京,100013;中国石油化工股份有限公司北京化工研究院,北京,100013;中国石油化工股份有限公司北京化工研究院,北京,100013 |
| |
| 摘 要： | 研究开发了BCE高效聚乙烯催化剂．并模拟超临界工艺制备出双峰聚乙烯树脂。BCE催化剂具有较高的活性（约为参考催化剂的2倍）和良好的氢调敏感性；与参考催化剂相比，该催化剂制备的聚乙烯树脂具有较高的堆积密度（0．39g／cm^3）和较窄的相对分子质量分布，重均分子量低于1000的部分较少。
|
| 关 键 词： | 双峰聚乙烯 催化剂 聚合 超临界聚合工艺 |
| 文章编号： | 1002-1396（2005）06-0001-03 |
| 收稿时间： | 2005-07-14 |
| 修稿时间： | 2005-10-24 |
Study on synthesis of bimodal PE with BCE catalyst |
| |
| Zhang Jingmei,Guo Zifang,Chen Wei,Zhou Junling,Yang Hongxu. Study on synthesis of bimodal PE with BCE catalyst[J]. China Synthetic Resin and Plastics, 2005, 22(6): 1-3 |
| |
| Authors: | Zhang Jingmei Guo Zifang Chen Wei Zhou Junling Yang Hongxu |
| |
| Affiliation: | Beijing Research Institute of Chemical Industry, SINOPEC, Beijing, 100013 |
| |
| Abstract: | This paper developed a kind of high efficiency polyethylene (PE) catalyst, denoted as BCE, and prepared bimodal PE with BCE in the simulated supercritical polymerization technology. The catalyst exhibited a high activity that was twice as high as the reference catalyst and an outstanding sensitivity to hydrogen modulation. Compared with the PE resin produced with reference catalyst, the bimodal PE resin prepared with BCE possessed a high bulk density up to 0.39 g/cm3 as well as a narrow molecular weight distribution with fewer fractions having weight-average molecular weight below 1 000. |
| |
| Keywords: | bimodal polyethylene catalyst polymerization supercritical polymerization technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
