Insights into Fullerene Passivation of SnO2 Electron Transport Layers in Perovskite Solar Cells

Interfaces between the photoactive and charge transport layers are crucial for the performance of perovskite solar cells. Surface passivation of SnO₂ as electron transport layer (ETL) by fullerene derivatives is known to improve the performance of n–i–p devices, yet organic passivation layers are susceptible to removal during perovskite deposition. Understanding the nature of the passivation is important for further optimization of SnO₂ ETLs. X‐ray photoelectron spectroscopy depth profiling is a convenient tool to monitor the fullerene concentration in passivation layers at a SnO₂ interface. Through a comparative study using [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) and [6,6]‐phenyl‐C₆₁‐butyric acid (PCBA) passivation layers, a direct correlation is established between the formation of interfacial chemical bonds and the retention of passivating fullerene molecules at the SnO₂ interface that effectively reduces the number of defects and enhances electron mobility. Devices with only a PCBA‐monolayer‐passivated SnO₂ ETL exhibit significantly improved performance and reproducibility, achieving an efficiency of 18.8%. Investigating thick and solvent‐resistant C₆₀ and PCBM‐dimer layers demonstrates that the charge transport in the ETL is only improved by chemisorption of the fullerene at the SnO₂ surface.