| ZTM_(15)/20SiC_p陶瓷材料性能测试方法比较及分析 |
| |
| 引用本文： | Douglas J.Pysher,Ross Plovnick,蔡舒,袁启明,杨正方. ZTM_(15)/20SiC_p陶瓷材料性能测试方法比较及分析[J]. 硅酸盐通报, 2001, 0(4) |
| |
| 作者姓名： | Douglas J.Pysher Ross Plovnick 蔡舒 袁启明 杨正方 |
| |
| 作者单位： | 美国3M公司先进材料工艺中心(Douglas J.Pysher，Ross Plovnick)，天津大学材料科学与工程学院!天津300072(蔡舒，袁启明，杨正方) |
| |
| 摘 要： | 本文采用不同方法测定了ZTM15 /2 0SiCP 材料的弹性模量、维氏硬度、强度和韧性。结果表明因测试方法的不同 ,同一材料所测得的强度和韧性有较大差异。分别采用三点弯曲和单边切口梁法所测得的ZTM15 /2 0SiCP 材料的强度和韧性值偏大 ,由径向加载法所测得的强度值较小 ,因试样受双向应力 ,纵向最大压力是横向最大拉应力的 3倍 ,该压应力对断裂有很大影响。用压痕法测定材料的韧性时必须考虑残余应力的影响。
|
| 关 键 词： | 测试方法 强度 韧性 |
Comparison of Measuring Techniques for Mechanical Properties of ZTM_15 /20SiC)_P Ceramics |
| |
| Douglas J.Pysher Ross Plovnick. Comparison of Measuring Techniques for Mechanical Properties of ZTM_15 /20SiC)_P Ceramics[J]. Bulletin of the Chinese Ceramic Society, 2001, 0(4) |
| |
| Authors: | Douglas J.Pysher Ross Plovnick |
| |
| Abstract: | The elastic modulus,Vickers hardness,strength and toughness of ZTM 15 /20SiC p materials were measured.For the same materials,the values of strength and toughness measured by different methods appeared differently.It was found that the Diametral Compress technique gave lower limit values of strength compared with the three point bending method because of the influence of bi stress.While using the indentation method to determine the toughness,the effects of residual stress field must be considered. |
| |
| Keywords: | measuring technique strength toughness |
| 本文献已被 CNKI 等数据库收录！ |
