提高CPE机组无缝钢管成材率的研究 |
| |
引用本文: | 杭乃勤,;陈鼎勋,;王伯文,;刘升,;段家田,;康志勇. 提高CPE机组无缝钢管成材率的研究[J]. 武汉冶金科技大学学报, 2009, 0(5): 453-457 |
| |
作者姓名: | 杭乃勤, 陈鼎勋, 王伯文, 刘升, 段家田, 康志勇 |
| |
作者单位: | [1]武汉科技大学材料与冶金学院,湖北武汉430081; [2]武钢集团汉阳钢管厂,湖北武汉430035 |
| |
摘 要: | 通过分析CPE机组的生产工艺,得出切损是导致无缝钢管成材率低的主要原因。针对现场工艺及设备存在的问题,对定径、张力减径变形制度进行优化,对顶管缩口设备、顶管后切头方法进行改进。改进后的工艺减少张力减径增厚端的长度,减少顶管后的钢管切头,提高分切精度,因而降低切损,使机组全年综合成材率提高8%。
|
关 键 词: | CPE机组 无缝钢管 增厚端 成材率 |
Raising production yield of CPE seamless pipe hot rolling mill |
| |
Affiliation: | Hang Naiqin,Chen Dingxun,Wang Bowen,Liu Sheng,Duan Jiatian,Kang Zhiyong(1.College of Materials Science and Metallurgical Engineering,Wuhan University of Science and Technology,Wuhan 430081,China;2.Hanyang Steel Pipe Rolling Plant,Wuhan Iron and Steel Corporation,Wuhan 430035,China) |
| |
Abstract: | With the analysis of CPE mill technology,this paper concludes that cutting wastage results in the low production yield of seamless steel pipe.In light of the problems arising from the field,the sizing and diameter reduction deformation system,pipe jacking device,and cutting method are improved,after which pipe end cutting is reduced,split accuracy is improved,length of pipe end upset during stretch reduction has decreased.As a result,cutting wastage is reduced,and the yearly production yield has risen by 8%. |
| |
Keywords: | CPE mill seamless steel pipe pipe end upset production yield |
本文献已被 维普 等数据库收录! |
|