| 基于USB总线的数控机床联网 |
| |
| 引用本文： | 宋丹.基于USB总线的数控机床联网[J].机床与液压,2006(4):195-197. |
| |
| 作者姓名： | 宋丹 |
| |
| 作者单位： | 浙江机电职业技术学院数控培训中心,浙江杭州310053 |
| |
| 摘 要： | USB作为一种新的PC机互连协议，因其诸多优点，有逐渐取代RS232串口，成为计算机和外设标准接口之趋势。本文详细介绍了利用USB总线与RS232串行线建立计算机与数控机床通信联网方案，同时给出USB／RS-232接口转换卡设计及串行通信软件设计的方法。该联网系统工作可靠、效率高，在数控实习中心的联网使用中取得了较好的效果。
|
| 关 键 词： | 联网通信 转换卡 数控机床 |
| 文章编号： | 1001-3881(2006)4-195-3 |
| 收稿时间： | 2005-01-31 |
| 修稿时间： | 2005年1月31日 |
CNC Machine Network Based on USB Bus |
| |
| SONG Dan.CNC Machine Network Based on USB Bus[J].Machine Tool & Hydraulics,2006(4):195-197. |
| |
| Authors: | SONG Dan |
| |
| Affiliation: | CNC Training Center, Zhejiang Institute of Mechanical and Electrical Engineering, Hangzhou Zhejiang 310053, China |
| |
| Abstract: | USB is a new PC interconnection protocol and has many advantages, It is a tendency that USB replaces the RS232 as computer and peripheral standard interface. The scheme of establishing computer and CNC machine communtication network with USB and RS232 serial bus was introduced, the design method of USB/RS232 converter and the serial communication software was presented, The system is convenient and efficient, it has got a good effect in the application of CNC center network. |
| |
| Keywords: | USB |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
