| 气压式熔融沉积系统丝宽与轮廓补偿研究 |
| |
| 引用本文： | 方勇,王伊卿,卢秉恒.气压式熔融沉积系统丝宽与轮廓补偿研究[J].模具工业,2007,33(2):53-57. |
| |
| 作者姓名： | 方勇 王伊卿 卢秉恒 |
| |
| 作者单位： | 西安交通大学,机械制造系统工程国家重点实验室,陕西,西安,710049;西安交通大学,机械制造系统工程国家重点实验室,陕西,西安,710049;西安交通大学,机械制造系统工程国家重点实验室,陕西,西安,710049 |
| |
| 摘 要： | 介绍了气压式熔融沉积系统的工作原理及工艺特点,提出了挤出丝的截面形状模型,建立了成型过程的数学物理方程,推出了理论丝宽的表达式,测量了AJS系统成型过程中不同温度和压力条件下材料的挤出速率,通过理论计算与实际测量结果的比较,确定了丝宽截面模型。最终根据得到的不同工艺条件下的丝宽值确定了扫描间距和轮廓补偿半径等工艺参数。
|
| 关 键 词： | 熔融沉积成型 气压式熔融沉积系统 工艺参数 |
| 文章编号： | 1001-2168（2007）02-0053-05 |
| 收稿时间： | 2006-10-09 |
| 修稿时间： | 2006年10月9日 |
Research on filament width and contour compensation of airpressure jet solidification system |
| |
| FANG Yong,WANG Yi-qing,LU Bing-heng.Research on filament width and contour compensation of airpressure jet solidification system[J].Die & Mould Industry,2007,33(2):53-57. |
| |
| Authors: | FANG Yong WANG Yi-qing LU Bing-heng |
| |
| Abstract: | The work principle and technique characteristic of AJS(Air-pressure Jet Solidification System) were summarized.The section model of filament extruded was presented.The mathematical and physical equations were established to describe the molding process.In addition the theoretical expression of filament width was obtained.The extrusion rates of materials under different forming temperature and pressure conditions were measured.The model of filament width section was determined after a comparison of theoretical calculation values and measuring results.Finally the technological parameters of scan spacing and contour compensation radius were determined according to filament width values under different technique conditions. |
| |
| Keywords: | fused deposition molding air-pressure jet solidification system technological parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
