首页 | 本学科首页   官方微博 | 高级检索  
     

电弧超声改善等离子喷涂纳米结构ZrO2涂层结合强度研究
引用本文:陈进武,李强,张玉叶,吴敏生.电弧超声改善等离子喷涂纳米结构ZrO2涂层结合强度研究[J].热加工工艺,2008,37(3):87-89.
作者姓名:陈进武  李强  张玉叶  吴敏生
作者单位:福州大学材料科学与工程学院,福建,福州,350108
基金项目:福建省科技厅科技计划项目
摘    要:研究采用电弧超声来改善等离子喷涂纳米结构ZrO2涂层的结合强度.结果表明.加入电弧超声后,涂层组织更加致密,气孔率和未熔化区减小.当电弧超声频率在30~70kHz时,电弧超声对改善涂层结合强度是有利的.并在50kHz时达到最大值;当超声频率大于70kHz时,由于涂层中纳米颗粒的大量减少,涂层的结合强度呈下降的趋势.

关 键 词:电弧超声  等离子喷涂  纳米结构涂层  结合强度
文章编号:1001-3814(2008)03-0087-03
收稿时间:2007-11-27
修稿时间:2007年11月27

Research on Arc-ultrasonic to Improve Adhesive Strength of Plasma Sprayed Nano-structured ZrO2 Coatings
CHEN Jinwu,LI Qiang,ZHANG Yuye,WU Minsheng.Research on Arc-ultrasonic to Improve Adhesive Strength of Plasma Sprayed Nano-structured ZrO2 Coatings[J].Hot Working Technology,2008,37(3):87-89.
Authors:CHEN Jinwu  LI Qiang  ZHANG Yuye  WU Minsheng
Abstract:As a new method to improve adhesive strength of plasma sprayed nano-structured ZrO2 coatings, arc-ultrasonic was introduced. The results show that the arc-ultrasonic can densify the structure, decrease the porosity and percentage of partly-molten regions of the coatings. The influence of are-ultrasonic on adhesive strength is dramatic. The adhesive strength increases when the ultrasound frequency changes at 30-70 kHz, which achieves the maximum value at 50 kHz, when the frequency is greater than 70 kHz, the adhesive strength decreases conversely because of the significant reduction of the nano-structured particles.
Keywords:arc-ultrasonic  plasma spraying  nano-structured coating  adhesive strength
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号