首页 | 本学科首页   官方微博 | 高级检索  
     

X80管线钢焊接热影响区的二次脆化研究
引用本文:吕统全,王勇,占焕校. X80管线钢焊接热影响区的二次脆化研究[J]. 焊管, 2007, 30(4): 21-24. DOI: 1001-3938(2007)04-0021-04
作者姓名:吕统全  王勇  占焕校
作者单位:中国石油大学,机电工程学院,山东,东营,257061;中国石油大学,机电工程学院,山东,东营,257061;中国石油大学,机电工程学院,山东,东营,257061
摘    要:采用热模拟技术研究了二次热循环对X80级管线钢焊接粗晶区性能的影响。试验结果表明,一次峰值温度1300℃作用后,再经过800℃二次热循环时韧性显著下降,发生严重脆化;经过1200℃二次热循环作用时韧性最好,断口形貌为韧窝状。一次热循环峰值温度800℃作用后,再经过1300℃的二次峰值温度作用,其冲击韧性远远低于母材,发生严重脆化,断口形貌为解理状。

关 键 词:X80级管线钢  热模拟  焊接热影响区  二次热循环  脆化
文章编号:1001-3938(2007)04-0021-04
修稿时间:2006-09-19

Quadratic Short Study of Welding Heated Affect Zone on Grade X80 Pipeline Steel
LU Tong-quan,WANG Yong,ZHAN Huan-xiao. Quadratic Short Study of Welding Heated Affect Zone on Grade X80 Pipeline Steel[J]. Welded Pipe and Tube, 2007, 30(4): 21-24. DOI: 1001-3938(2007)04-0021-04
Authors:LU Tong-quan  WANG Yong  ZHAN Huan-xiao
Abstract:To study quadratic heat circulation to the effect of welding wide crystal area performance of X80 pipeline steel by adopting thermal simulation technology.The experimental results show that it will occur seriously short after once peak value temperature 1300℃ and the toughness prominently decrease then through 800℃ quadratic heat circulation;the toughness is the best through 1200℃ quadratic heat circulation and the fracture appearance shows tight nest type.The impacting toughness is far off lower than that of parent metal and occurs seriously short and the fracture appearance shows unbind texture type after once peak value temperature 800℃ and then through 1300℃ quadratic peak value temperature.
Keywords:X80 pipeline steel  thermal simulation analog  heated affect zone  quadratic heat circulation brittleness
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊管》浏览原始摘要信息
点击此处可从《焊管》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号