| 热挤压变形改善Cu/FeS复合材料的性能 |
| |
| 引用本文： | 胡付立,陈敬超,张志伟,刘满门,耿永红,张昆华,管伟明.热挤压变形改善Cu/FeS复合材料的性能[J].稀有金属材料与工程,2009,38(Z1). |
| |
| 作者姓名： | 胡付立 陈敬超 张志伟 刘满门 耿永红 张昆华 管伟明 |
| |
| 作者单位： | 1. 昆明理工大学稀贵及有色金属先进材料教育部重点实验室,云南省新材料制备与加工重点实验室,云南,昆明,650093
2. 昆明贵金属研究所,云南,昆明,650221 |
| |
| 基金项目： | 云南省应用基础研究计划重点项目 |
| |
| 摘 要： | 利用金相显微镜,透射电镜和硬度实验等手段考察了不同Fes含量Cu/Fes复合材料挤压前后的显微组织和性能变化.结果表明:经过热挤压后的复合材料组织均匀性得到了极大的改善,纵截面出现了纤维状排列的组织,材料的致密度和硬度得到改善,电导率有所降低,并分析了其原因.
|
| 关 键 词： | Cu/FeS复合材料 热挤压 显微组织 性能分析 |
Properties of Cu/FeS Composites Improved via Hot Extrusion Deformation |
| |
| Hu Fuli,Chen Jingchao,Zhang Zhiwei,Liu Manmen,Geng Yonghong,Zhang Kunhua,Guan Weiming.Properties of Cu/FeS Composites Improved via Hot Extrusion Deformation[J].Rare Metal Materials and Engineering,2009,38(Z1). |
| |
| Authors: | Hu Fuli Chen Jingchao Zhang Zhiwei Liu Manmen Geng Yonghong Zhang Kunhua Guan Weiming |
| |
| Affiliation: | Hu Fuli 1,Chen Jingchao1,Zhang Zhiwei1,Liu Manmen1,Geng Yonghong2,Zhang Kunhua2,Guan Weiming2 (1. Key Laboratory Advanced Materials of Precious-Nonferrous Metals,Education Ministry of China,Key Laboratory of Advanced Materials of Yunnan Province,Kunming University of Science , Technology,Kunming 650093,China) (2. Kunming Institute of Precious Metal,Kunming 650221,China) |
| |
| Abstract: | The microstructure and properties of Cu/FeS composites reinforced by different contents before and after hot extrusion were investigated by OM,TEM and hardness test etc. It was indicated that the microstructure of composites became homogenous via hot extrusion deformation,and the cross section presented fiber shape. It was analysed that the relative density and hardness was improved and the electricity was reduced. |
| |
| Keywords: | Cu/FeS composites hot extrusion microstructure properties analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
