首页 | 本学科首页   官方微博 | 高级检索  
     

不锈钢酸洗废水处理中的污泥减排技术
引用本文:高亮.不锈钢酸洗废水处理中的污泥减排技术[J].中国给水排水,2009,25(10).
作者姓名:高亮
作者单位:上海市机电设计研究院有限公司,上海,200040
摘    要:不锈钢行业酸洗废水的传统处理工艺为采用石灰碱化法做单步沉淀处理,该方法因石灰过量投加而导致污泥量过大.为此采用分步沉淀法进行了工艺改造,并分析了该工艺的出水水质、污泥产量、处理成本.工程实践表明:该工艺能使出水指标稳定达到<污水综合排放标准>(GB 8978-1996)的一级标准,污泥减量70%以上,处理费用下降50%以上,值得推广应用.

关 键 词:酸洗废水  含氟废水  污泥减量  污泥分质  分步沉淀法

Sludge Reduction Technology in Stainless Steel Acid Cleaning Wastewater Treatment
GAO Liang.Sludge Reduction Technology in Stainless Steel Acid Cleaning Wastewater Treatment[J].China Water & Wastewater,2009,25(10).
Authors:GAO Liang
Affiliation:GAO Liang(Shanghai Institute of Mechanical and Electrical Engineering Co.Ltd.,Shanghai 200040,China)
Abstract:The traditional method of using lime to treat stainless steel acid cleaning wastewater(ACW) in one-stage precipitation generates large amount of sludge due to excessive lime dosage.Therefore,the process reconstruction was performed by two-step precipitation,and the effluent quality,sludge production,treatment cost were analyzed.The practice shows that the effluent quality can meet the first class discharge standard in the Integrated Wastewater Discharge Standard(GB 8978-1996).The sludge is reduced by more t...
Keywords:acid cleaning wastewater  fluoride wastewater  sludge reduction  sludge separation  two-step precipitation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号