| Abstract: | Reduction of friction and wear for parts made of aluminium by diamond-like carbon coatings Reduction of friction and wear of machine parts and tools is usually achieved by separating the participating surfaces. This is predominantly done by liquid lubricants. Solid lubricant coatings replace them where hydrodynamic lubrication is not possible or not active. Among the hard and friction reducing layers diamond-like carbon films (DLC) have distinguished themselves as the most interesting representatives. They are deposited on metallic and ceramic parts in a glow discharge of a hydrocarbon gas at temperatures between 150 and 200 °C. Those low deposition temperatures, their very low dry sliding friction coefficient of 0.05 to 0.1, and an elastic recovery of 90 % differentiate them from PVD coatings to a high degree. DLC can also be deposited on light metals with thicknesses of more than 30 μm. For closed films an outstanding protection against corrosion is established. Machining and forming of light metals can be done without cooling lubricants. |
