| 不锈钢搅拌桨铸造毛坯的CAD/CAM |
| |
| 引用本文： | 田美丽,徐燕申,薛兆鹏. 不锈钢搅拌桨铸造毛坯的CAD/CAM[J]. 组合机床与自动化加工技术, 2006, 0(1): 82-84 |
| |
| 作者姓名： | 田美丽 徐燕申 薛兆鹏 |
| |
| 作者单位： | 1. 天津大学,机械工程学院,天津,300072
2. 天津工程师范学院,机械工程系,天津,300222 |
| |
| 摘 要： | 开发了搅拌桨型值点计算软件模块，可完成搅拌桨铸造毛坯的型值点计算。以UG集成软件为平台，建立了搅拌桨铸造模型的三维数据模型；利用UG的CAM模块，生成木模的数控加工程序，研究了多轴数控铣削加工工艺，应用五轴联动铣削搅拌桨毛坯木模；并对搅拌桨铸造毛坯进行了检测及误差分析，为毛坯余量的设定提供了依据。
|
| 关 键 词： | 不锈钢搅拌桨 铸造木模型 多轴数控铣削 数控编程 |
| 文章编号： | 1001-2265(2006)01-0082-03 |
| 收稿时间： | 2005-08-15 |
| 修稿时间： | 2005-08-15 |
CAD/CAM of the Casting for Stainless Steel Propeller |
| |
| TIAN Mei-li,XU Yan-shen,XUE Zhao-peng. CAD/CAM of the Casting for Stainless Steel Propeller[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2006, 0(1): 82-84 |
| |
| Authors: | TIAN Mei-li XU Yan-shen XUE Zhao-peng |
| |
| Abstract: | This paper developed a calculating feature points of propeller program, which can also computing feature points of propeller casting. The 3-D data model of the propeller casting was built based on UG; NC program of wood-model was generated with CAM module of UG, Multi-axis NC milling process was also discussed ,and propeller casting wood-model was machined by fwe-axis milling. By using this new method the precision of the casting was improved,manufacturing cost was reduced and production efficiency was increased for stainless steel propeller. |
| |
| Keywords: | stainless steel propeller casting wood-model multi-axis NC milling NC programming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
