| 无扭控冷热轧高碳钢盘条索氏体含量金相检测方法的研究 |
| |
| 引用本文： | 袁危平,王克杰.无扭控冷热轧高碳钢盘条索氏体含量金相检测方法的研究[J].天津冶金,1999(4):41-44. |
| |
| 作者姓名： | 袁危平 王克杰 |
| |
| 作者单位： | 天津钢集团有限公司
(袁危平，王克杰)，天津钢集团有限公司(班茹梅) |
| |
| 摘 要： | 针对无扭控冷热轧高碳钢盘条索氏体含量金相检测方法进行了系统的研究,并对索氏体定义的理解、显微镜配置、检测点位置确定、显微视场选择有关重点问题进行了深入研究,确定了切实可行的无扭控冷热轧高碳钢盘条索氏体含量金相检测方法。
|
| 关 键 词： | 高碳钢盘条 索氏体 金相 图像仪检测 |
The research of the method of metallographic Detection for Sorbitic Content of Non - Torsion Cold Control Hot Rolling High Carbon steel Wire Rod |
| |
| Tianjin Tiangang Group Co. Ltd Yuan Weiping Wang Kejie Ban Rumei.The research of the method of metallographic Detection for Sorbitic Content of Non - Torsion Cold Control Hot Rolling High Carbon steel Wire Rod[J].Tianjin Metallurgy,1999(4):41-44. |
| |
| Authors: | Tianjin Tiangang Group Co Ltd Yuan Weiping Wang Kejie Ban Rumei |
| |
| Affiliation: | Tianjin Tiangang Group Co. Ltd Yuan Weiping Wang Kejie Ban Rumei |
| |
| Abstract: | The Metallographical phase detecting method on sorbitic content of non - lorsion cold control hot rolling high carbon steel wire rod are systemetically studied in this paper. And the concerning key problms of the understanding of sorbitic defination, the preparation of the microscope, the determination of detecting points and the selection of mic-srscopy field are profoundly probed. The practical detecting method on sorbitic content of non - lorsion cold control hot rolling high carbon steel wire rod are determined. |
| |
| Keywords: | High carbon steel wire rod sorbitic metallographical phase microscope detection |
| 本文献已被 CNKI 维普 等数据库收录！ |
