Microstructure and reliability of hybrid interconnects by Au stud bump with Sn-0.7Cu solder for flip chip power device packaging

With miniaturization of the interconnect solder bumps, high current density causes serious reliability issues (stress, electromigration etc.) in electronic packages. Through Au stud bumping on the chips and following reflow of solder to produce hybrid interconnects, the eletromigration resistance may be improved by the intermetallics formed inside them due to their barrier effects on the atoms migration. Here, microstructures and reliabilities of Au stud with serial amounts of Sn-0.7Cu solder paste were studied through controlling size of stencil printing aperture. After reflow, AuSn, AuSn₂ and AuSn₄ formed from the surface of Au stud bump to the solder. A layer of (Cu,Au)₆Sn₅ with thickness of 3 μm existed at the interface near the Cu substrate with a scallop shape similar to Cu₆Sn₅. The fraction of intermetallics to the mixed joints varied with the solder amount. Shear strength decreased slightly when comparing with the sole solder joint due to large amounts of brittle intermetallics. Thermal aging resulted in many Kirkendall voids generated at the interfaces of Au stud and the solder, which further decreased the shear strength. The effect of solder amount on microstructural evolution and fracture modes was discussed. The hybrid interconnects showed a good electromigration resistance.