| 基于测量S参数的有源器件FDTD建模方法 |
| |
| 引用本文： | 陈智慧,褚庆昕.基于测量S参数的有源器件FDTD建模方法[J].电子与信息学报,2008,30(11):2767-2770. |
| |
| 作者姓名： | 陈智慧 褚庆昕 |
| |
| 作者单位： | 1. 西安电子科技大学电子工程学院,西安,710071
2. 华南理工大学电子与信息学院,广州,510640 |
| |
| 基金项目： | 国家自然科学基金(60171011;60571056)资助课题
|
| |
| 摘 要： | 该文提出了一种新的基于测量s参数的有源器件FDTD建模方法。该方法借助于矢量拟合技术(VF)和分段递推卷积技术(PLRC)完成建模，不必知道器件的等效电路，并保留了传统FDTD算法显式差分的特点，得到了一般性的FDTD迭代公式。另外，该方法的数据处理过程主要在所需频段内操作，避免了传统方法中由直接逆傅里叶变换所引起的非因果时域误差。对于全波分析包含实际有源器件的微波电路具有一定的实用价值。
|
| 关 键 词： | FDTD S参数 矢量拟合技术 分段递推卷积技术 |
| 收稿时间： | 2007-5-14 |
| 修稿时间： | 2007-9-24 |
FDTD Modeling of Active Devices Characterized by Measured S-Parameters |
| |
| Chen Zhi-hui,Chu Qing-xin.FDTD Modeling of Active Devices Characterized by Measured S-Parameters[J].Journal of Electronics & Information Technology,2008,30(11):2767-2770. |
| |
| Authors: | Chen Zhi-hui Chu Qing-xin |
| |
| Affiliation: | (School of Electronic Engineering, Xidian University, Xi’an 710071, China) (College of Electronic and Information Engineering, South China University of Technology, Guangzhou 510640, China) |
| |
| Abstract: | A novel FDTD modeling approach for active devices characterized by measured S-parameters is presented. This approach applies Vector Fitting (VF) technique and Piecewise Linear Recursive Convolution (PLRC) technique to complete modeling process, and does not need to know the equivalent circuits of active devices. It preserves the explicit nature of the conventional FDTD method, and obtains a general updated formula. Furthermore, the main data-processing procedure is directly handled over the frequency band of interest, which avoids the time-domain non-causal error in traditional techniques. It is useful to full-wave analyze hybrid microwave circuits including practical active devices. |
| |
| Keywords: | FDTD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电子与信息学报》浏览原始摘要信息 |
|
点击此处可从《电子与信息学报》下载全文 |
