| 竖炉导风墙水冷大梁的改进及设想 |
| |
| 引用本文： | 郝素菊,蒋武锋,方觉,赵丽树.竖炉导风墙水冷大梁的改进及设想[J].烧结球团,2004,29(5):15-17. |
| |
| 作者姓名： | 郝素菊 蒋武锋 方觉 赵丽树 |
| |
| 作者单位： | 河北理工大学 |
| |
| 摘 要： | 导风墙水冷大梁的寿命是制约我国竖炉生产的主要因素。本文分析了导风墙水冷大梁的损坏机理及工艺设计改进，并提出了一种能从根本上解决其寿命问题的改进设想：即水冷大梁设上、下两根，导风墙采用预制模块技术。
|
| 关 键 词： | 导风墙 竖炉 水冷 大梁 设想 中国 生产 制约 问题 主要因素 |
ASSUMPTION OF IMPROVIMG THE AIR-GUIDING WALL AND THE WATER-COOLING BEAM |
| |
| Hao Suju et al..ASSUMPTION OF IMPROVIMG THE AIR-GUIDING WALL AND THE WATER-COOLING BEAM[J].Sintering and Pelletizing,2004,29(5):15-17. |
| |
| Authors: | Hao Suju |
| |
| Affiliation: | Hao Suju et al. |
| |
| Abstract: | The life times of the air-guiding wall and the water-cooling beam are the main factors which effects the shaft furnace production. Their damage mechanism and design improvement are analyzed, and then an assumption is put forward: set two water-cooling beams, i.e. an upper water-cooling beam and a lower water-cooling beam, and the air-guiding wall was build with prefabricate module technology. |
| |
| Keywords: | shaft furnace air-guiding wall water-cooling beam damage mechanism prefabricate module |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
