| 刀具姿态对H13模具钢加工表面残余应力的影响 |
| |
| 引用本文： | 王维,赵军,李月恩. 刀具姿态对H13模具钢加工表面残余应力的影响[J]. 工具技术, 2010, 44(2): 19-22 |
| |
| 作者姓名： | 王维 赵军 李月恩 |
| |
| 作者单位： | 1. 山东大学
2. 山东大学;山东建筑大学 |
| |
| 基金项目： | 教育部新世纪优秀人才支持计划资助项目(NCET-06-0588);;山东省优秀中青年科学家科研奖励基金资助项目(2005BS05002);;山东省科学技术发展计划资助项目(2007GG20004003) |
| |
| 摘 要： | 测量高速铣削条件下采用不同刀具姿态加工淬硬H13模具钢后的残余应力,实验结果表明:不同的刀具姿态对表面残余应力幅值有较大影响;相同的刀具姿态,切削方式不同也会影响表面残余应力的变化趋势。实验结果显示逆铣条件下前倾角15°、侧倾角-15°时表面残余压应力最大。分析刀具刃线与工件的接触几何模型特征,得出铣削后残余应力分布规律,优化高速铣削刀具姿态参数。
|
| 关 键 词： | 球头铣削 刀具位姿 H13模具钢 残余应力 |
Effects of Cutter-orientations on Machined Surface Residual Stress during H13 Die Steel Milling |
| |
| Wang Wei,Zhao Jun,Li Yueen Postgraduate,Key Laboratory of High Efficiency , Clean Mechanical Manufacture,Ministry of Education,School of Mechanical Engineering,Sh,ong University,Jinan ,China. Effects of Cutter-orientations on Machined Surface Residual Stress during H13 Die Steel Milling[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2010, 44(2): 19-22 |
| |
| Authors: | Wang Wei Zhao Jun Li Yueen Postgraduate Key Laboratory of High Efficiency Clean Mechanical Manufacture Ministry of Education School of Mechanical Engineering Sh ong University Jinan China |
| |
| Affiliation: | Wang Wei,Zhao Jun,Li Yueen Postgraduate,Key Laboratory of High Efficiency , Clean Mechanical Manufacture,Ministry of Education,School of Mechanical Engineering,Sh,ong University,Jinan 250061,China |
| |
| Abstract: | The residual stress of H13 dies steel on various cutter-orientations in the hlgh-speed milling is measured, the experiment results show that effects of the cutter-orientations on residual stress are notable, meanwhile, at the same cutter-orientation, different cutting mode could affect the variation of residual stress. With the results we could also learn that the residual stress is maximum on the up milling in which the anteversion angle is 15°and the side rake angle is - 15°. A geometrical model between cutting edge and workpiece is analyzed to find out the rule of residual stress distribution, and then the cutter-orientation could be optimized. |
| |
| Keywords: | ball end milling cutter-orientation H13 die steel residual stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
