A low-power transmission-gate-based 16-bit multiplier for digital hearing aids |
| |
Authors: | Flavio Carbognani Felix Buergin Norbert Felber Hubert Kaeslin Wolfgang Fichtner |
| |
Affiliation: | 1. D-ITET, Integrated Systems Laboratory, ETH Zurich, Gloriastrasse 35, Zurich, 8092, Switzerland
|
| |
Abstract: | The most widespread 16-bit multiplier architectures are compared in terms of area occupation, dissipated energy, and EDP (Energy-Delay Product) in view of low-power low-voltage signal processing for digital hearing aids and similar applications. Transistor-level simulations including back-annotated wire parasitics confirm that the propagation of glitches along uneven and re-convergent paths results in large unproductive node activity. Because of their shorter full-adder chains, Wallace-tree multipliers indeed dissipate less energy than the carry-save (CSM) and other traditional array multipliers (6.0 µW/MHz versus 10.9 µW/MHz and more for 0.25 µm CMOS technology at 0.75 V). By combining the Wallace-tree architecture with transmission gates (TGs), a new approach is proposed to improve the energy efficiency further (3.1 µW/MHz), beyond recently published low-power architectures. Besides the reduction of the overall capacitance, minimum-sized transmission gate full-adders act as RC-low-pass filters that attenuate undesired switching. Finally, minimum size TGs increase the V dd to ground resistance, hence decreasing leakage dissipation (0.55 nW versus 0.84 nW in CSM and 0.94 nW in Wallace). |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|