|
|||||
|
|
| 螺旋锥齿轮拟合齿面啮合特性分析方法 | |
| 引用本文： | 李小清,周云飞,王延忠,易传云. 螺旋锥齿轮拟合齿面啮合特性分析方法[J]. 中国机械工程, 2003, 14(13): 1139-1143 |
| 作者姓名： | 李小清 周云飞 王延忠 易传云 |
| 作者单位： | 1. 华中科技大学,武汉市,430074 2. 华中科技大学国家数控系统工程技术研究中心 3. 华中科技大学机械科学与工程学院 |
| 基金项目： | 国家自然科学基金资助项目(50 0 750 31 ) |
| 摘 要： | 已知齿面测量的采样点，利用微分几何及Ferguson参数样条曲面原理，建立了螺旋锥齿轮齿面拟合的数学模型。根据优化求极值复合形方法和共轭理论，通过变定义域，快速求解齿轮副拟合齿面接触点，并运用V—H接触区调整方法，研究了拟合齿面接触迹、接触区和运动误差曲线的求解算法，绘制出相关图形并给出了实例。 |
| 关 键 词： | 螺旋锥齿轮 齿面拟合 啮合特性 齿面测量 |
| 文章编号： | 1004-132X(2003)13-1139-05 |
Analysis Method for Meshing Characteristics of Spiral Bevel and Hypoid Gear Fitting Tooth Surface |
|
| Li Xiaoqing. Analysis Method for Meshing Characteristics of Spiral Bevel and Hypoid Gear Fitting Tooth Surface[J]. China Mechanical Engineering, 2003, 14(13): 1139-1143 | |
| Authors: | Li Xiaoqing |
| Abstract: | Given the sampling points of tooth surface measurement,a mathematical model for spiral bevel and hypoid gear fitting tooth surface is established by applying principle of differential geometry and Ferguson parameter spline function. According to the "BOX" optimization method for finding extremum with a limited boundary and conjugation theory, quick solving the contacting point of tooth surface can be realized by changing definition region. Using V-H contact patterns adjusting method, An algorithm for finding path of contact, contact pattern and transmission errors is investigated and related picture of an actual example is presented. |
| Keywords: | spiral bevel and hypoid gear tooth surface fitting meshing characteristics measurement of tooth surface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |