| 微驱动定位进给系统结构优化设计研究 |
| |
| 引用本文： | 王明强,奚浩,周赟,纪飞飞. 微驱动定位进给系统结构优化设计研究[J]. 机械设计与制造, 2019, 0(5): 194-198 |
| |
| 作者姓名： | 王明强 奚浩 周赟 纪飞飞 |
| |
| 作者单位： | 江苏科技大学机械工程学院 |
| |
| 基金项目： | 2016年度镇江市重点研发计划(GY2016002) |
| |
| 摘 要： | 当前宏微双驱动定位进给系统中微驱动平台力学性能差、精度低,且柔性铰链作为微驱动平台关键部分,直接影响着微驱动平台的定位精度等各项性能。为此,采用OptiStruct软件对微驱动定位进给系统的柔性铰链进行结构拓扑优化后,以工程塑料(ABS)为原材料通过3D打印进行加工。利用有限元对整个微动平台系统进行模态分析并通过模态试验进行了验证。最终获得柔性铰链以及整个微动平台的最优结构,在保证结构刚度、精度的同时达到了结构轻量化的目的。
|
| 关 键 词： | 微动平台 定位进给 工程塑料 柔性铰链 拓扑优化 模态实验 |
Research on Optimization Structure Design of Micro-Drive Positioning and Delivery System |
| |
| WANG Ming-qiang,XI Hao,ZHOU Yun,JI Fei-fei. Research on Optimization Structure Design of Micro-Drive Positioning and Delivery System[J]. Machinery Design & Manufacture, 2019, 0(5): 194-198 |
| |
| Authors: | WANG Ming-qiang XI Hao ZHOU Yun JI Fei-fei |
| |
| Affiliation: | (School of Mechanical Engineering,Jiangsu University of Science and Technology,Jiangsu Zhenjiang 212003,China) |
| |
| Abstract: | At present,the micro drive platform in macro micro dual drive positioning feed system has the disadvantages of poor mechanical performance and low precision. And flexible hinge is the key part of the micro drive platform,it has a direct impact on the positioning accuracy of the micro drive platform. In this paper,the structure of the flexible hinge was optimized by OptiStruct software firstly,and then the flexible hinge was made of elastic plastic(ABS)by 3D printing. The finite element method is used to carry out modal analysis and verified by modal test. And finally we obtained the optimal structure of the flexible hinge and the whole fretting platform,not only ensure structural stiffness and accuracy,but achieve the purpose of lightweight structure too. |
| |
| Keywords: | Micromotion Stage Positioning Feed Engineering Plastics Flexure Hinge Topology Optimization Modal Experiment |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
