| Cr12MoV钢冷挤压模具的热处理工艺 |
| |
| 引用本文： | 程芳,马霄,王慧. Cr12MoV钢冷挤压模具的热处理工艺[J]. 河南机电高等专科学校学报, 2003, 11(1): 35-36 |
| |
| 作者姓名： | 程芳 马霄 王慧 |
| |
| 作者单位： | 河南机电高等专科学校,机械工程系,河南,新乡,453002 |
| |
| 摘 要： | 通过对冷挤压凸模的工作特点及失效分析，提出改善模具材料中碳化物的分布的方式及合理的热处理工艺，这是提高该模具使用寿命的关键措施．
|
| 关 键 词： | Crl2MoV钢 挤压模具 冷挤压 热处理工艺 球化退火 |
| 文章编号： | 1008-2093(2003)01-035-02 |
| 修稿时间： | 2002-09-16 |
Heat treatment process of Cr12MoV stell cold extruding die |
| |
| CHENG Fang,et al. Heat treatment process of Cr12MoV stell cold extruding die[J]. Journal of Henan Mechanical and Electrical Engineering College, 2003, 11(1): 35-36 |
| |
| Authors: | CHENG Fang et al |
| |
| Abstract: | In this article ,by analyzing the working charactchistic of cold extruding die,the author gives the technique which can improve the scatter way of carbide in die material and suggests the proper heat treatment,which is the key measure of remitting the die's service life. |
| |
| Keywords: | cold extruding die material spheroidizing annealing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
