| 基于UG的车链轮设计与制造 |
| |
| 引用本文： | 李明亮,吴振.基于UG的车链轮设计与制造[J].机械工程师,2009(6):53-54. |
| |
| 作者姓名： | 李明亮 吴振 |
| |
| 作者单位： | 盐城纺织职业技术学院,江苏盐城,224006 |
| |
| 摘 要： | 针对原链轮存在的缺陷，重新设计了齿形，利用AutoCAD、CAXA与UG软件设计链轮，并进行仿真模拟，将得到的NC代码程序导入数控机床加工。加工后得到的链轮经适当热处理即可使用，在尺寸精度、硬度、强度等方面达到了要求。
|
| 关 键 词： | 链轮 设计 加工 UG |
Design and CAM of Chain Wheel of Tricycle Based on UG |
| |
| LI Ming-Liang,WU Zhen.Design and CAM of Chain Wheel of Tricycle Based on UG[J].Mechanical Engineer,2009(6):53-54. |
| |
| Authors: | LI Ming-Liang WU Zhen |
| |
| Affiliation: | (Yancheng Textile Vocation Technology College,Yancheng 224006, China) |
| |
| Abstract: | Aim at former chain wheel existenting vice, tooth shape is redesigned. Using software Autocad, CAXA and UG to design chain wheel, and simulating, NC codes programme is entered to numerical control machine to manufacture. Chain wheel which is manufactured can be used after suitability heat treament, dimension precision, rigidity, intension, etc, obtain the demand of use. |
| |
| Keywords: | UG |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
