首页 | 本学科首页   官方微博 | 高级检索  
     

油砂沥青改质工艺流程优化探讨
引用本文:崔德春,徐庆虎,熊亮,纪钦洪,于广欣,刘强. 油砂沥青改质工艺流程优化探讨[J]. 炼油技术与工程, 2021, 51(2): 5-9
作者姓名:崔德春  徐庆虎  熊亮  纪钦洪  于广欣  刘强
作者单位:中海油研究总院有限责任公司新能源研究中心,北京市 100029;中海油研究总院有限责任公司新能源研究中心,北京市 100029;中海油研究总院有限责任公司新能源研究中心,北京市 100029;中海油研究总院有限责任公司新能源研究中心,北京市 100029;中海油研究总院有限责任公司新能源研究中心,北京市 100029;中海油研究总院有限责任公司新能源研究中心,北京市 100029
摘    要:分析了某油砂沥青改质厂合成原油产品收率的设计值与实际运行值,结合现有单元装置,探讨了提高合成原油产品收率的工艺流程优化方案.研究表明,先溶剂脱沥青后热裂化的工艺组合,以及对脱油沥青黏度的认识不充分,造成合成原油实际运行收率偏低.探讨了减压渣油先热裂化再溶剂脱沥青的工艺流程方案.与原设计方案相比,优化的工艺方案馏分油收率...

关 键 词:油砂沥青  改质  工艺流程  热裂化  溶剂脱沥青  收率

Discussion on process optimization of oil sands bitumen modification
Cui Dechun,Xu Qinghu,Xiong Liang,Ji Qinhong,Yu Guangxin,Liu Qiang. Discussion on process optimization of oil sands bitumen modification[J]. Petroleum Refinery Engineering, 2021, 51(2): 5-9
Authors:Cui Dechun  Xu Qinghu  Xiong Liang  Ji Qinhong  Yu Guangxin  Liu Qiang
Affiliation:(New Energy Research Center,CNOOC Research Institute Co.,Ltd.,Beijing 100028)
Abstract:The design and actual operation value of the yield of synthetic crude oil products in an oil sands bitumen upgrader is analyzed. The optimization scheme of upgrading process to improve the yields of synthetic crude oil products is discussed in combination with the existing units. The results show that the process combination of solvent deasphalting followed by thermal cracking and the inadequate understanding of the viscosity of the deoiled bitumen result in the low actual operation yields of the synthetic crude oil. The process of vacuum residue thermal cracking first and then solvent deasphalting is discussed. Compared with the original design, the yields of products is 7.5 percentage points higher than the actual operation value, 3.0 percentage points higher than design value.
Keywords:oil sands bitumen  modification  technological process  thermal cracking  solvent deasphalting  yield
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号