Experimental and mechanistic study on chemical looping combustion of caking coal |
| |
Authors: | Xiuli Zhang Zhengdong Gao Yongzhuo Liu Yuanhao Hou Xiaoqing Sun Qingjie Guo |
| |
Affiliation: | 1. Key Laboratory of Clean Chemical Processing of Shandong Province, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China;2. State Key Laboratory of High-efficiency Coal Utilization and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan 750021, China |
| |
Abstract: | Under high-temperature batch fluidized bed conditions and by employing Juye coal as the raw material,the present study determined the effects of the bed material,temperature,OC/C ratio,steam flow and oxygen carrier cycle on the chemical looping combustion of coal.In addition,the variations taking place in the surface functional groups of coal under different reaction times were investigated,and the varia-tions achieved by the gas released under the pyrolysis and combustion of Juye coal were analyzed.As revealed from the results,the carbon conversion ratio and rate were elevated significantly,and the vol-ume fraction of the outlet CO2 remained more than 92% under the oxygen carriers.The optimized reac-tion conditions to achieve the chemical looping combustion of Juye coal consisted of a temperature of 900℃,an OC/C ratio of 2,as well as a steam flow rate of 0.5 g·min-1.When the coal was undergoing the chemical looping combustion,volatiles primarily originated from the pyrolysis of aliphatic-CH3 and-CH2,and CO and H2 were largely generated from the gasification of aromatic carbon.In the CLC process,H2O and CO2 began to separate out at 270 ℃,CH4 and tar began to precipitate at 370 ℃,and the amount of CO2 was continuously elevated with the rise of the temperature. |
| |
Keywords: | Caking coal Chemical looping combustion Optimized reaction conditions |
本文献已被 万方数据 等数据库收录! |
| 点击此处可从《中国化学工程学报》浏览原始摘要信息 |
|
点击此处可从《中国化学工程学报》下载全文 |
|