| 感应钎焊工艺对黄铜接头组织的影响 |
| |
| 引用本文： | 孙计生,潘晖,刘效方. 感应钎焊工艺对黄铜接头组织的影响[J]. 稀有金属, 2001, 25(3): 211-214 |
| |
| 作者姓名： | 孙计生 潘晖 刘效方 |
| |
| 作者单位： | 北京航空材料研究院焊接与锻压工艺研究室, |
| |
| 摘 要： | 研究了感应钎焊时 ,不同钎焊参数对零件内外表面温度的影响 ,分析了钎焊工艺参数对母材组织和接头质量的影响。缓慢升温可使工件内外表面温度达到平衡 ,钎焊温度在 780℃以下 ,保温时间小于 2 0s的工艺参数可获得优良钎缝和不损伤母材组织。
|
| 关 键 词： | 感应钎焊 黄铜 组织 |
| 文章编号： | 0258-7076(2001)03-0211-04 |
| 修稿时间： | 2000-12-04 |
Influence of Induction Brazing Process on Microstructures of Brass Joint |
| |
| Sun Jisheng,Pan Hui,Liu Xiaofang. Influence of Induction Brazing Process on Microstructures of Brass Joint[J]. Chinese Journal of Rare Metals, 2001, 25(3): 211-214 |
| |
| Authors: | Sun Jisheng Pan Hui Liu Xiaofang |
| |
| Abstract: | The influence of different induction brazing parameters on the temperatures of the inner and external surfaces of the workpiece was mainly discussed, and the influence of brazing parameters on base material microstructures and joint quality was analyzed. The results show that the temperature difference between the inner surface and external surface of the workpiece can be minimized when the temperature is increased slowly.On the conditions of brazing temperature not higher than 780℃ and holding time of lower than 20 seconds, excellent brazing seam can be achieved and base material microstructures are not damaged. |
| |
| Keywords: | Induction brazing Brass Microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
