| 带拉杆的平板设计 |
| |
| 引用本文： | 向承翔.带拉杆的平板设计[J].机械工程师,2009(8):127-128. |
| |
| 作者姓名： | 向承翔 |
| |
| 作者单位： | 重庆市三峡水利电力学校,重庆,404000 |
| |
| 摘 要： | 压力容器上的平板结构的强度计算通常依据国家标准《钢制压力容器》，采用这一标；隹计算的平板较厚，加大了材料消耗和设备的重量。如果采用美国标准《ASME锅炉及压力容器规范》设计计算，将平板设计成带有拉杆的平板，计算出的平板厚度更小，更节省材料，传热速度更快，热效率更高。
|
| 关 键 词： | 拉杆 平板 设计 |
The Flat-panel with Pull-rod Design |
| |
| XIANG Cheng-xiang.The Flat-panel with Pull-rod Design[J].Mechanical Engineer,2009(8):127-128. |
| |
| Authors: | XIANG Cheng-xiang |
| |
| Affiliation: | XIANG Cheng-xiang (Chongqing Three Gorges Water Conservancy and Electric Power School,Chongqing 404000, China) |
| |
| Abstract: | The Intensity of the flat-panel structures on the pressure vessels are often calculated based on the country standards＂Steel Pressure Vessels＂, using the standard to calculat the flat-panel is very thick, and Increase consumption of materials and equipment weight. If using American standard ＂ASME Boiler and Pressure Vessel Norm＂to design and calculat, a fiat-panel will be designed as a fiat-panel with pull-rod, so that the calculated plate thickness is quite smaller and save materials. |
| |
| Keywords: | pull-rod flat-panel design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
