Color evolution during a coating process of pharmaceutical tablet cores by random spraying

Placebo white tablet cores (lactose anhydrous 47.6%], corn starch 23.8%], microcrystalline cellulose 19.1%], polyvinylpyrrolidone 7.9%], magnesium stearate 0.8%], and talcum powder 0.8%]) were coated with a colorant (hydroxypropyl methylcellulose 8% w/v], titanium dioxide 0.2% w/v], FD&C yellow No. 6 with aluminum lacquer 0.8% w/v], polyethylene glycol 4000 0.4% w/v], and purified water q.s.p. 100 mL]) using a random spraying method during 130 minutes. During the coating process, batches of 21 samples were extracted every 10 minutes and measured with a DigiEye imaging system. The initial cores showed very similar and uniform colors (Mean Color Difference from the Mean MCDM] of 0.8 CIELAB units), but partially coated tablets showed lower uniformity (MCDM below 2.0 CIELAB units). There was a high color variability (MCDM about 4.0 CIELAB units) among tablets of the same batch in the period between 10 and 30 minutes, which decreased as the coating process progressed, until achieving a final acceptable value (MCDM below 2.0 CIELAB units). During the coating process, L^* decreased, C^*_ab strongly increased, and h _ab remained nearly constant (disregarding results at 0 and 10 minutes). CIELAB and CIEDE2000 color differences (mainly chroma differences) with respect to the initial color of the tablets were modeled as a function of time by exponential functions with three coefficients. The color change in the interval from 90 to 130 minutes (4.3 CIELAB units, or 2.6 CIEDE2000 units), may be considered negligible bearing in mind the color variability in the batches of 21 samples and typical values of visual color thresholds.