Effective turbulence and its implications in wind turbine fatigue assessment

The effective turbulence approximation is widely used in the wind energy industry for site‐specific fatigue assessment of wind turbines with reference to loads. It significantly reduces the amount of aero‐elastic simulations required to document structural integrity by integrating out the directional variation of turbulence. Deriving the effective turbulence involves assumptions related to load effect histories, structural dynamics, and material fatigue strength. These assumptions may lead to low accuracy of fatigue load assessments by the effective turbulence compared with full directional simulations. This paper quantifies the implications of the effective turbulence for a multimegawatt wind turbine during normal operation. Analyses based on wind measurements from almost one hundred international sites document that the effective turbulence provides accurate results compared with full sector‐wise simulations, but only when linear SN ‐curves are assumed. For a more advanced steel tower design approach using a bilinear SN ‐curve, a reduction of the cross‐sectional design parameters by almost 10% is achieved. Additional 10% reduction can be obtained if fatigue damage is estimated utilizing the wind direction information. By applying a probabilistic approach, it is shown that this reduction in the design parameter of the steel tower does not compromise the structural integrity when the current IEC 61400‐1 standard is followed. The results presented may improve decision making in site‐specific fatigue assessments of wind turbines and prevent overconservative design, which results from the use of the effective turbulence, and thereby reduce the cost of wind energy.