|
|||||
|
|
| 重型燃气轮机铸造机匣的强度与刚度分析 | |
| 引用本文： | 刘星,李克安,唐驾时,温纪云. 重型燃气轮机铸造机匣的强度与刚度分析[J]. 汽轮机技术, 2011, 53(2) |
| 作者姓名： | 刘星 李克安 唐驾时 温纪云 |
| 作者单位： | 1. 长沙理工大学汽车与机械工程学院,长沙,410076 2. 长沙理工大学汽车与机械工程学院,长沙,410076;湖南理工学院机械与电气工程系,岳阳,414006 3. 湖南大学力学与航空航天学院,长沙,410082 |
| 基金项目： | 国家863计划项目，国家自然科学基金 |
| 摘 要： | 大功率重型燃气轮机机匣一般采用锻造和铸造两种方法制造.铸造机匣虽加工较易、安装简便、造价较低,但因其壁厚受温度因素影响大,所以即使在对设备重量和体积无特别要求时也少被采用.在考虑温度因素影响的基础上,对某重型燃气轮机铸造机匣受转子重力、静子叶片排的轴向力和扭矩、气动力、气压力和热膨胀力等组合载荷作用时的强度和刚度进行了有限元分析,并得出如下结论:温度因素的确是影响铸造机匣强度和刚度的重要因素,在考虑温度影响的情况下,机匣受组合载荷作用产生的应力和应变均达到最大值,但仍在合理的范围之内.分析方法和计算结果可供同类设备设计研制时借鉴和参考. |
| 关 键 词： | 重型燃气轮机 铸造机匣 热应力 强度 刚度 |
Analysis of Strength and Stiffness for Heavy-duty Gas Turbine Casing |
|
| LIU Xing,LI Ke-an,TANG Jia-shi,WEN Ji-yun. Analysis of Strength and Stiffness for Heavy-duty Gas Turbine Casing[J]. Turbine Technology, 2011, 53(2) | |
| Authors: | LIU Xing LI Ke-an TANG Jia-shi WEN Ji-yun |
| Affiliation: | LIU Xing1,LI Ke-an1,2,TANG Jia-shi3,WEN Ji-yun3(1 College of Automobile and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410076,China,2 Department of Mechanical and Electrical Engineering,Hunan Institute of Science and Technology,Yueyang 414006,3 College of Mechanics & Aerospace,Hunan University,Changsha 410082,China) |
| Abstract: | High-power heavy-duty gas turbine casing generally use the forging and casting two ways to manufacture.Although cast casing can easy procession,installation and low cost,as temperature great affect its wall thickness,so cast casing was less used at equipment even its weight and size without have especially requirements.Based on considering the impact of temperature factor,the finite element strength and stiffness analysis of high-power heavy-duty gas turbine cast casing was analysed under combination loads,... |
| Keywords: | heavy-duty gas turbine cast casing thermal stress strength stiffness |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |