| 水下管道自动坡口机的研究 |
| |
| 引用本文： | 弓海霞,孟庆鑫,房晓明.水下管道自动坡口机的研究[J].中国机械工程,2005,16(4):283-286. |
| |
| 作者姓名： | 弓海霞 孟庆鑫 房晓明 |
| |
| 作者单位： | 1. 哈尔滨工程大学,哈尔滨,150001
2. 中国海上石油工程股份有限公司,天津,300452 |
| |
| 基金项目： | 国家 863 高技术研究发展计划资助项目(2002AA602012-1) |
| |
| 摘 要： | 设计了专门用于海底油气输送管道安装、维修的水下坡口机。根据总体维修方案的要求，考虑到现场作业的特殊需要，确定了由径向进给机构、周向爬管进给机构、链条固定及导向装置、切割／坡口刀具等部件组成的本体方案，给出了比例阀控液压系统的设计方案及参数计算。针对坡口机在水中的实际工作，确定了坡口机的控制方案及故障排除方法。
|
| 关 键 词： | 水下坡口机 油气管道维修 液压系统 检测与控制 |
| 文章编号： | 1004-132X(2005)04-0283-04 |
Research on Automatic Underwater Pipe Beveling Machine |
| |
| GONG Hai-xia,Meng Qing-xin,FANG Xiao-ming.Research on Automatic Underwater Pipe Beveling Machine[J].China Mechanical Engineering,2005,16(4):283-286. |
| |
| Authors: | GONG Hai-xia Meng Qing-xin FANG Xiao-ming |
| |
| Affiliation: | Gong Haixia1 Meng Qingxin1 Fang Xiaoming2 1. Harbin Engineering University,Harbin,150001 2.Offshore Oil Engineering Co. Ltd.,China,Tianjin,300452 |
| |
| Abstract: | The design of underwater beveling machine was put forward, laying of seabed oil & gas pipelines installation and service. According to underwater work environment and total service scheme, the designed machine was composed of radial feed mechanism, circumference creeping mechanism, chain fixture & guide device, cutting/beveling tool. Its hydraulic system of proportional valve control and parameter calculation was made sure. Its control and sense scheme of underwater work was established. Finally, some methods of removing faults were introduced. |
| |
| Keywords: | underwater beveling machine oil & gas pipe service hydraulic system sense and control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
