| 面向配筋CAD的水工结构分析可视化系统研究 |
| |
| 引用本文： | 王启富,张红,陈刚. 面向配筋CAD的水工结构分析可视化系统研究[J]. 小型微型计算机系统, 2006, 27(4): 727-731 |
| |
| 作者姓名： | 王启富 张红 陈刚 |
| |
| 作者单位： | 华中科技大学,国家CAD支撑软件工程研究中心,湖北,武汉,430074 |
| |
| 基金项目： | 教育部科学技术研究项目;中国科学院资助项目 |
| |
| 摘 要： | 针对传统水利工程设计中水工建模、结构分析、配筋设计以及输出施工详图等系统相互分离，导致设计效率低下等问题。开发一种面向三维配筋CAD系统的水工结构分析可视化系统．该系统将结构整体分析结果通过插值算法得到查询剖面的分析结果，并可视化显示，以此来直观指导模型的修改和后续的配筋设计．系统在应用中提高了设计效率，取得了良好的效果．
|
| 关 键 词： | 水工结构 配筋设计 可视化 |
| 文章编号： | 1000-1220（2006）02-0727-05 |
| 收稿时间： | 2004-12-07 |
| 修稿时间： | 2004-12-07 |
Visual Hydro-Structure Analysis System Oriented 3D Reinforcement CAD System |
| |
| WANG Qi-fu,ZHANG Hong,CHEN Gang. Visual Hydro-Structure Analysis System Oriented 3D Reinforcement CAD System[J]. Mini-micro Systems, 2006, 27(4): 727-731 |
| |
| Authors: | WANG Qi-fu ZHANG Hong CHEN Gang |
| |
| Affiliation: | National CAD Support Software Engineering Research Center, Huazhong University of Science and Technology, Wuhan 430074, China |
| |
| Abstract: | 3D hydro-structure modeling design, structure analyzing, reinforcing steel bar designing and drafting were separated into isolation system in the traditional hydro-structure design process, which results in low design efficiency. A visual hydrostructure analysis system oriented 3D reinforcement CAD system is developed in this paper, which computes and visualizes the analytical result of random cross section of the hydro-structure depending on whole analytical result. And the analytical result directly supply instruction for modifying hydro-structure model tual project design, the efficiency of design is improved greatly and designing reinforcing steel bar. By using this system in actual project design, the efficiency of design is improved greatly and great effect is achieved. |
| |
| Keywords: | CAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
