| 薄壁PE桶气动脱模的注射模设计 |
| |
| 引用本文： | 周小玉. 薄壁PE桶气动脱模的注射模设计[J]. 天津化工, 2000, 0(4): 32-33 |
| |
| 作者姓名： | 周小玉 |
| |
| 作者单位： | 天津理工学院材料科学与工程系!天津300191 |
| |
| 摘 要： | 针对大型，深腔，薄壁筒形件脱模较大，及要求成型后变形小的特点，采用气动的脱模方式进行了注射模具的设计。
|
| 关 键 词： | 脱模力 聚乙烯桶 气动脱模 注射模设计 |
The design of injection molding with pneumatic ejecting mechanism for thin wall barrel of PE |
| |
| Zhou Xiao-yu. The design of injection molding with pneumatic ejecting mechanism for thin wall barrel of PE[J]. Tianjin Chemical Industry, 2000, 0(4): 32-33 |
| |
| Authors: | Zhou Xiao-yu |
| |
| Abstract: | Design the injection molding with pneumatic ejecting ,so as to suit the injection molding with big ejecting force in deep mold and thin wall barrel. |
| |
| Keywords: | ejecting force pneumatics injection molding PE |
| 本文献已被 CNKI 维普 等数据库收录！ |
