Mechatronic approach to the feeding system of an overlock sewing machine |
| |
Affiliation: | 1. Mechatronics and Robotics Engineering Department, School of Innovative Design Engineering, E-JUST, Egypt;2. Department of Production and Design Engineering, Faculty of Engineering, Minia University, Egypt;3. Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Egypt;4. Department of Mechanical Engineering, Faculty of Engineering, Alexandria University, Egypt;5. Electronics and Communications Eng. Dept., Faculty of Engineering, Cairo University, Egypt;1. Research Institute of Highway Ministry of Transport, No. 8 Road Xitucheng, Haidian District, Beijing 100088, PR China;2. Section of Road and Railway Engineering, Faculty of Civil Engineering & Geosciences, Delft University of Technology, PO Box 5048, 2600 GA Delft, The Netherlands;3. VANKEULEN advies bv, Multatulistraat 5, 5251 WV Vlijmen, The Netherlands;4. Department of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA 50011-3232, USA;1. School of Civil Engineering & Mechanics, Jiangsu University, Zhenjiang 212013, China;2. State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an 710049, China;3. Faculty of Engineering, University of Toyama, Toyama 9308555, Japan;1. Department of Mechanical Engineering, Brunel University London, UK;2. Department of Experimental Medicine and Immunotherapeutics, Addenbrooke''s, UK |
| |
Abstract: | This paper describes the initial study of the research program being carried out on the feeding system of an industrial overlock sewing machine. The results obtained from the displacement and compression force, together with the graphic kinematic analysis, which includes the velocity and acceleration taken from the displacement–time curves of the presser foot bar, led to further understanding of the feeding system dynamics. This study is expected to provide the basis for the development of a redesigned and optimised fabric feeding system, in which the role of an actuator integrated in the presser foot bar will also be discussed as a major contribution to achieving a desired dynamic behaviour at high sewing speeds. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|