| 低速走丝电火花线切割加工几种编程方法的探讨 |
| |
| 引用本文： | 周航,周宛. 低速走丝电火花线切割加工几种编程方法的探讨[J]. 电加工与模具, 2005, 0(1): 48-51 |
| |
| 作者姓名： | 周航 周宛 |
| |
| 作者单位： | 1. 郑州大学,河南郑州,450002
2. 河南工业职业技术学院,河南南阳,473009 |
| |
| 摘 要： | 对低速走丝电火花线切割机加工某一类工件的4种编程方法作了详尽的分析、比较，总结出一种最优化的方法，可达到减少差错，降低成本，避免重复劳动，提高生产效率的目的。
|
| 关 键 词： | 电火花线切割加工 编程方法 优化 |
| 修稿时间： | 2004-09-17 |
Discussion on the Method of EDM Programing |
| |
| ZHOU Hang,Zhou Wan. Discussion on the Method of EDM Programing[J]. Electromachining & Mould, 2005, 0(1): 48-51 |
| |
| Authors: | ZHOU Hang Zhou Wan |
| |
| Abstract: | In this paper four methods of programing for low speed wire travelling EDM are discussed, compared, and analyzed in detail. And then we can get a optimum method as a conclusion, which can lower work strength, save producting cost, meanwhile improve the enterprise's profit and raise its competitive power in the current machining marketplace. Therefore we recommend it to our confreres specially. |
| |
| Keywords: | WEDM programing method optimizing method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
