The damage and failure of GRP laminates by underwater explosion shock loading |
| |
| Affiliation: | 1. Department of Defence, DSTO, Materials Research Laboratory, PO Box 50, Ascot Vale, Victoria, Australia;1. HMAS Creswell, Jervis Bay, ACT, Australia, 2540;1. State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China;2. Yazhou Bay Institute of Deepsea SCI-TECH, Shanghai Jiao Tong University, Sanya, 572000, China;3. Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi University, Nanning, 530004, China;1. PLA Laboratory of Protective Materials and Structures, State Key Laboratory for Disaster Prevention & Mitigation of Explosion & Impact, PLA University of Science and Technology, Nanjing 210007, China;2. State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;3. Sichuan ShengxinTaiji Technology Co., Ltd., Chengdu 611330, China;1. Blast Impact and Survivability Research Unit, Department of Mechanical Engineering, University of Cape Town, South Africa;2. Department of Civil & Environmental Engineering, Imperial College, London, UK;1. Sir Lawrence Wackett Aerospace Research Centre, School of Engineering, RMIT University, 124 Latrobe Street, Melbourne, Victoria, Australia;2. Institut für Textiltechnik of RWTH Aachen University, Otto-Blumenthal-Straße 1, 52074 Aachen, Germany |
| |
| Abstract: | This paper examines the development of microstructural damage in a glass-reinforced polymer (grp) laminate subjected to explosive shock loading in water. GRP is commonly used in small naval vessels, and may be subjected to underwater explosions. In the experiments, the laminates were exposed to increasing amounts of shock loading produced by underwater explosions. The laminates were backed with either water or air to modify the amount of bending experienced under loading, with the air-backed laminates having the higher amount of bending. Examination of the grp microstructure by optical and scanning electron microscopy after shock testing failed to reveal any damage to either the polymer matrix or glass fibres when the laminate was backed with water. In contrast, when the laminate was backed with air, small cracks were produced in the polymer matrix at low shock pressures. Raising the shock pressure above a threshold limit caused complete failure of the laminate by cracking in the polymer matrix, cracking of the glass fibres, and delamination of the glass fibres from the polymer. The differences in the shock resistance of the water- and air-backed grp are discussed. Measurements of the residual tensile fracture strength of the laminates after shock loading are also presented. The fracture strength of the water-backed laminate was not affected by shock, but the fracture strength of the air-backed laminate deteriorated with the onset of glass fibre breakage and delamination in the grp microstructure. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
